Stone wool Rockwool ROCKMIN 100mm

Compare

Stone wool Rockwool ROCKMIN 100mm

Slabs of stone wool, with a slightly lower density. They are characterised by the highest non-combustibility class - A1.
The board is light, but at the same time very resistant, so it retains its thermal and acoustic properties for many years. It is best used for insulating ventilated ceilings and attics, wooden beam ceilings and floors on joists, suspended ceilings and partition walls.

2-4 weeks

Thermal conductivity λD	0,039 W/mK
Density	29 kg/m3
Fire classification	A1
Compressive stress at 10% deformation	*NPD
Tensile strength perpendicular to faces	*NPD
Point load	*NPD
Available thickness (mm)	50, 75, 100, 150
Additional information	–

Loft Mineral wool for thermal insulation and insulation in usable and non-usable attics and lofts: above the rafters, between the rafters, under the rafters as well as suspended ceilings and knee walls (so-called dry construction).
Partition Walls Mineral wool for insulation and insulation of walls from the inside, construction of partition walls, pre-walls, partition walls and industrial pre-walls.
Frame constructions, ceilings, floors on joists Mineral wool for insulation and insulation of: floors on a grid, industrial ceilings, ventilated flat roofs, floors on joists on a wooden or steel structure, suspended ceilings, external and internal walls of frame houses and wooden houses.

Thickness [mm]	Lenght [mm]	Width [mm]	Pieces per pack [pcs.] / [m2]	Packs per pallet [pcs.] / [m2]	R [m2K/W]
50	1 000	610	18 / 10,98	30 / 329,40	1,25
75	1 000	610	12 / 7,32	30 / 219,60	1,90
100	1 000	610	10 / 6,10	30 / 183,00	2,55
150	1 000	610	6 / 3,66	30 / 109,80	3,80